Authorized
Parts Dealer
AB
DICK ~ ITEK
RYOBI ~ MULTI ~ TOKO
CRESTLINE ` BAUM ~ T51
KNIFE MOTORS & RELATED
HARDWARE PER AVAILABILITY
| MODEL # | MOTOR PART # | COMMENT |
| 430CPU | 19582801 | Uses 4 each screw, part # H4721 |
| 430RL
(below SN 2101) 435 (below SN 189) |
19236901 | SN 2101-2117 can be either old or new style. Can be identified by "no material" |
|
430RL (above SN 2117)
435 (SN 189 and up) |
19533101 | switch: old style has an o- ring; new style has a wire |
| 1218 (SN 2766 and below) | 0584880 Obsolete | Winding Motor |
| 1218 (SN 2767 and up) "Mark IV") | 19168901 | Knife drive motor, at top, horizontal |
| 19102601 | Plate transport drive motor; located on the side of the knife assembly, mounted vertically. Uses: screw, part # H4721 and lock washer, part # H1551. Accompanying gears are obsolete. | |
| 613S | 19322801 |
Revised: February 23, 2010